home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Gold Collection
/
Software Vault - The Gold Collection (American Databankers) (1993).ISO
/
cdr27
/
4lwps.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-05-03
|
12KB
|
302 lines
*****************************************************************
*****************************************************************
README FILE FOR THE HEWLETT-PACKARD LASERJET 4L PRINTING SYSTEM
FOR MICROSOFT WINDOWS 3.1
31.V1.00 for Windows 3.1
*****************************************************************
*****************************************************************
This README file contains the following information:
* Hewlett-Packard LaserJet 4L Printing System Introduction
* Features of Hewlett-Packard LaserJet 4L Printing System for
Microsoft Windows 3.1
* Minimum System Requirements
* Installation Instructions
* User Hints
*****************************************************************
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY
ACCOMPANY THIS DOCUMENT (collectively referred to as HP LaserJet
4L Printing System for Microsoft Windows 3.1 version 31.V1.00)
IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
PURPOSE. The user assumes the entire risk as to the accuracy
and the use of Hewlett-Packard LaserJet 4L Printing System
version 31.V1.00.
The HP LaserJet 4L Printing System for Microsoft Windows 3.1
version 31.V1.00 may be copied and distributed for use with
other HP LaserJet 4L Printers subject to the following
conditions:
1) All text must be copied without modification and all pages
must be included;
2) All files on the disk must be copied without modification
(the DOS utility DISKCOPY is appropriate for this purpose);
3) All components of the HP LaserJet 4L Printing System for
Microsoft Windows 3.1 version 31.V1.00 must be distributed
together; and
4) The HP LaserJet 4L Printing System for Microsoft Windows 3.1
version 31.V1.00 may not be distributed for profit.
Copyright (c) 1990, 1991, 1992, 1993 Hewlett-Packard Company.
Copyright (c) 1985, 1986, 1987, 1988, 1989, 1990, 1992,
1993 Microsoft Corp.
Copyright (c) 1988, 1989 Aldus Co.
All Rights Reserved.
Intellifont is a registered trademark of AGFA Compugraphic, a
division of AGFA Corporation.
IBM PC and PC-DOS are trademarks of International Business
Machines Corporation.
MS-DOS and Windows are registered trademarks of Microsoft
Corporation.
***************************************************************
HEWLETT-PACKARD LASERJET 4L PRINTING SYSTEM FOR MICROSOFT
WINDOWS 3.1 INTRODUCTION
***************************************************************
The HP LaserJet 4L Printing System for Microsoft Windows 3.1 is
a collection of software that gives you convenient access to your
printer's features when used in the Microsoft Windows 3.1
environment.
***************************************************************
FEATURES OF THE HP LASERJET 4L PRINTING SYSTEM FOR MICROSOFT
WINDOWS 3.1
****************************************************************
The HP LaserJet 4L Printing System for Microsoft Windows 3.1
version 31.V1.00 provides the following new features:
Automatic Setup.
The HP LaserJet 4L Printing System for Microsoft Windows 3.1
provides its own automatic setup program. It is NOT
necessary to install this printing system through the
Control Panel. Setup instructions are detailed in this
README file.
Graphical Status Window.
The HP LaserJet 4L Printing System for Microsoft Windows 3.1
Status Window graphically displays printing status and error
information about the printer on the PC screen. A small
Window pops up automatically when a job is printed and
displays an image of the printer as well as the name of the
print job and the current time. If an error occurs during the
print job, information is provided in the Status Window
regarding the error. In addition, condition-specific Help
information can be accessed by pressing F1 or choosing the
Help option on the Status Window menu.
The HP LaserJet 4L Printing System for Microsoft Windows 3.1
Bi-Tronics I/O communication driver for the PC and printer
parallel port allows bi-directional communication to the PC
in order to provide status and error information to be
displayed by the Status Window.
Support for Sound.
The Microsoft Windows 3.1 Sound driver for the PC speaker as
well as several sound files are provided with the HP LaserJet
4L Printing System. This sound driver utilizes the audio
speaker of the PC to communicate printer conditions verbally
in conjunction with the Status Window.
Updated Version of Microsoft Print Manager for Windows 3.1.
This updated version of the Print Manager provides an expanded
Tool Bar from which you can pause and resume print queues as
well as pause, resume, re-order, and delete individual print
jobs. Additionally, a new Information button is provided
which when pressed activates the HP LaserJet 4L Status Window.
The Print Manager must be enabled and activated for proper
Status Window performance. The Setup program automatically
enables and activates the Windows Print Manager during
installation.
Support for Graphics Quality.
The LaserJet 4L Printing System supports 300, 150, and 75
dpi. The actual graphics resolution settings are denoted by
the descriptive terms of High, Medium, and Low rather than
the actual dpi.
Support for the internal Intellifont typefaces.
All the internal Intellifont typefaces in the HP LaserJet
4L printer are supported in the 19U symbol set. To obtain
WYSIWYG results, use HP Intellifont which supports on-the-fly
screen fonts to match your printer fonts in Windows 3.1.
Support for HP-GL/2
Support for HP-GL/2 is provided in the HP LaserJet 4L Printing
System for Microsoft Windows 3.1 version 31.V1.00. Under the
Options Dialog in the Printer Setup, an option of "Graphics
Mode" is available. Two options are present: HP-GL/2 or
Raster. The first choice enables HP-GL/2 which will increase
print performance. The second choice uses raster only. The
default graphics mode is set to raster for the HP LaserJet 4L.
Support for EconoMode
Support for EconoMode is provided in the HP LaserJet 4L
Printing System for Microsoft Windows 3.1 version 31.V1.00
within the Options Dialog. There are two options available,
On or Off. With EconoMode enabled the output will resemble
draft mode, using fewer dots in order to conserve toner.
Support for Print Density
Print density support is provided in the Options Dialog.
Adjust the density of the printer according to the desired
density. The density range is one (lightest) to five
(darkest).
Dialog Support for REt
Another feature added to the Option Dialog is the REt
(Resolution Enhancement technology) box. The options here
are Light, Medium, Dark, and Off.
***************************************************************
MINIMUM SYSTEM REQUIREMENTS
***************************************************************
To use the HP LaserJet 4L Printing System for Microsoft Windows
3.1, you must have the following:
- An HP LaserJet 4L printer
- DOS version 3.31 or later
- Microsoft Windows 3.1 or later
- An IBM-compatible 286 computer, or faster
- A high-density floppy disk drive
- 2 MBytes RAM (4 MBytes recommended for satisfactory Windows
performance)
- A VGA-compatible (or higher resolution) monitor
- 1.75 MBytes of hard disk space available to install the
components of the HP LaserJet 4L Printing System for
Microsoft Windows 3.1.
NOTE: Most devices connected between the HP LaserJet 4L printer
and the host computer prevent the printer from sending data
back to the computer. Therefore, the Status Window will not
operate with HP LaserJet 4L printers on networks, the HP
LaserJet Fax, most hardware print spoolers, some software
print spoolers, and some switch boxes.
***************************************************************
INSTALLATION INSTRUCTIONS
***************************************************************
To install the HP LaserJet 4L Printing System for Microsoft
Windows 3.1 version 31.V1.00:
NOTE: If you intend to use HP Intellifont for Windows to
produce screen fonts for the Intellifont typefaces in the
HP LaserJet 4L, you must install Intellifont for Windows
BEFORE installing the printing system. Please refer to
the Intellifont for Windows instructions.
1. Start Microsoft Windows.
2. Insert the HP LaserJet 4L Printing System for Microsoft
Windows 3.1 Setup disk into a high-density 3.5" floppy disk
drive (usually A or B).
3. From the Windows Program Manager select the File menu.
4. Choose RUN.
5. Type A:\SETUP (or B:\SETUP) and press ENTER.
6. Follow the instructions on the computer screen.
NOTE: Once you have installed the HP LaserJet 4L Printing
System for Microsoft Windows 3.1, if an older Hewlett-Packard
printer driver installation for the LaserJet 4 family is
later attempted, Windows will prompt the user with the
following message:
"The currently installed HPPCL5E.DRV is newer...
than the one you are attempting to install. Do
you still want to install the file?"
Select CANCEL for this dialog. If NO is selected, there is
the possibility of damaging critical files needed for the
HP LaserJet 4L Printing System for Microsoft Windows 3.1.
Do not select YES unless the older driver is desired.
A more recent driver for your particular printer can be
obtained by calling HP Driver Distribution at (303)353-7650
in the USA and Canada or through your authorized HP dealer
in other countries.
NOTE: In the event that you would like to deinstall the HP
LaserJet 4L Printing System for Microsoft Windows 3.1, the
following instructions provide that ability:
1. From the Windows Program Manager select the File menu.
2. Choose RUN.
3. Type C:\WINDOWS\DINSTALL -FDINSTALL.INS
4. You will be prompted to ensure that the HP LaserJet 4L
Printing System is to be deinstalled.
This deinstallation will only disable the Status Window of
HP LaserJet 4L Printing System for Microsoft Windows 3.1.
The updated Print Manager and printer driver will remain
operable.
***************************************************************
USER HINTS
***************************************************************
On-line help files are included with the HP LaserJet 4L Printing
System for Microsoft Windows 3.1. Help can be accessed on the
Status Window, driver, and the HP font installer screens. Choose
Help from these screens to access the HELP information.
***************************************************************
HEWLETT-PACKARD CUSTOMER SUPPORT CENTER
(USA and Canada only)
***************************************************************
You can call the Hewlett-Packard Customer Support Center
weekdays between 7 a.m. and 6 p.m. (Mountain Standard Time),
except for Wednesday when the hours are 7 a.m. to 4 p.m.:
(208)323-2551. All other countries, please contact your
authorized HP dealer.